Motion Control
023RNX0030-XX-5525X
CGI Paragon 3:1 Planetary Right-Angle Gearhead
About this part
023RNX0030-XX-5525X is a CGI Motion Paragon RNX precision planetary right-angle gearhead. Its ordering code identifies a NEMA 23, single-output-shaft, single-stage 3:1 gearhead with the standard feature package and a CGI-assigned project code. Manufacturer ratings for the underlying 023RNX 3:1 configuration provide the technical baseline; suffix-specific motor-interface details remain controlled by project code 5525X
Configurations vary. Verify the exact unit before choosing a replacement.
Key Facts
Specifications
| Manufacturer | CGI, Inc. (CGI Motion) |
| Part number | 023RNX0030-XX-5525X |
| Product line | Paragon RNX |
| Gearhead type | Planetary right-angle, single output shaft |
| Frame size | NEMA 23 |
| Reduction stages | Single stage |
| Ratio | 3:1 |
| Feature code | XX — standard |
| Final code | 5525X — CGI-assigned project code |
| Rated output torque, Tc | 285 in-lb |
| Peak output torque, Tpeak | 396 in-lb |
| Backlash, standard configuration | 14 arc-minutes |
| Input-pinion inertia | 1.194 × 10^-3 oz·in·s² |
| Gearhead inertia | 4.866 × 10^-4 oz·in·s² |
| Gearhead weight | 4.2 lb |
| Length to flange, N | 4.51 in |
| Gearhead length, O | 6.78 in |
| Single-stage efficiency | 85% |
| Maximum input speed | 5,000 rpm |
| Operating temperature | -40 to +255 °F (-40 to +124 °C), per current manufacturer product page |
| Torque rating basis | Output torque rated at 3,000 rpm for a minimum life of 10,000 hours |
| Bearing-load basis | Minimum bearing life of 10,000 hours |
Model-code decoding
CGI ordering nomenclature separates the frame, gearhead type, ratio, feature package, and motor/project-specific suffix.
| Code segment | Meaning | Interpretation |
|---|---|---|
| 023 | NEMA frame size | NEMA 23 |
| RNX | Gearhead type | Paragon planetary right-angle gearhead with a single output shaft |
| 0030 | Ratio code | 3:1, single stage |
| XX | Feature code | Standard configuration |
| 5525X | Motor or project field | CGI-assigned project code; suffix-specific interface details require the corresponding project definition |
023RNX output geometry
These dimensions are the manufacturer’s catalog geometry for the 023RNX frame. A suffix-specific project drawing remains controlling where project code 5525X changes an interface.
| Dimension | Catalog value |
|---|---|
| Output pilot diameter | 1.498–1.500 in |
| Square flange | 2.25 in |
| Output shaft length | 1.25 in |
| Output shaft diameter | 0.4995–0.5000 in |
| Pilot length | 0.062 in |
| Flange thickness | 0.312 in |
| Key location | 0.56 in |
| Key height | 0.063 in |
| Housing diameter | 2.95 in |
| Bolt-hole diameter | 0.205 in |
| Bolt-hole circle | 2.625 in |
| Right-angle width | 3.55 in |
| Overhang width | 0.99 in |
| Key width / Woodruff key | 0.125 in / #404 |
| Catalog radial shaft load | 600 lb |
| Catalog axial shaft load | 600 lb |
Replacement and installation notes
- Do not select a replacement from the shortened 023RNX0030-XX code alone. CGI uses the final field for a motor-interface code or an assigned project code.
- CGI’s current configurator assigns suffix 01917 to a standard 023RNX 3:1 gearhead for the generic Yaskawa SGMAH-04 motor family. That current configuration must not be assumed interchangeable with project-coded suffix 5525X.
- If the gearhead will operate with its output shaft pointing upward, CGI directs users to obtain extra grease packets and instructions from its sales or engineering department.
- Motor-mounting hardware is supplied for standard RNX family configurations; confirm the hardware and pinion arrangement associated with project code 5525X before substitution.
Documentation Downloads
Local PDF copiesPart Photos
5 imagesHistorical archive images for identification, labels, connectors, and condition reference, not current inventory.
Historical Listings & Prices
Historical listing data, not a current offerThe typical recorded price range is $1,615.37 to $1,615.37. Based on 1 archived listing record; not a current offer, appraisal, or confirmed sale price.
View archived listing titles
- Brooks THK Robot Yaskawa SGMAH-04A1F4C AC Servo Motor CGI 023RNX0030-XX-5525X