Flow Measurement

1110CJ46CJDAG

Brooks Instrument Full-View liquid variable-area flowmeter

About this part

1110CJ46CJDAG is a configured Brooks Full-View 1110 liquid flowmeter. The documented configuration positions identify a Size 8 meter with an R-8M-25-4 borosilicate metering tube, 8-RV-31 float, 316 stainless-steel float and end fittings, PTFE packing and O-ring, 1/2-inch female NPT connections, and an inlet valve. Brooks lists the Full-View 1100 Series as a legacy product

Configurations vary. Verify the exact unit before choosing a replacement.

No archived photo available

Key Facts

ManufacturerBrooks Instrument Full-View 1100 Series
Part number1110CJ46CJDAG
Product familyConfiguration-specific
Device typeFlowmeter
Configuration statusConfiguration varies
Application classIndustrial automation and process equipment
CategoryFlow Measurement

Specifications

Identification
ManufacturerBrooks Instrument
Product familyFull-View 1100 Series
Product statusLegacy product
Measurement principleGlass-tube variable-area flow indication
Configured construction
Meter sizeSize 8
Metering tubeR-8M-25-4; 250 mm nominal scale length
Float8-RV-31
Float material316 stainless steel
End fittings316 stainless steel
Packing and O-ringPTFE packing and PTFE O-ring
Process connections1/2-inch female NPT
ValveHorizontal-stem valve on inlet
Configured performance
Nominal water capacity2.06 GPM (7.80 L/min) according to the published capacity table for an R-8M-25-4 tube, 8-RV-31 float, and stainless-steel float material
Liquid pressure drop23 inches of water column at the published nominal maximum water flow
Viscosity-immunity ceiling7.0 cS for the documented stainless-steel-float configuration with liquid specific gravity 1.0
Configured limits
Maximum operating pressure300 psig for a Size 8 meter with metallic end fittings at the published 70°F, 150°F, and 250°F rating points
Series specifications
Ambient temperature range33 to 125°F (1 to 52°C)
Operating-fluid temperature range33 to 250°F (1 to 121°C) with metallic end fittings
Flow accuracyStandard ±2% of full scale; optional ±1% of full scale. The exact calibration grade of this unit is not resolved by the surviving identifier documentation
Repeatability0.5% of full scale
Series construction
Metering-tube materialBorosilicate glass
Protective sleeveUV-stabilized polycarbonate for Size 8 and larger meters
WindowScratch-resistant, UV-stabilized polycarbonate
Connection adjustmentConnections are rotatable through 360 degrees in 90-degree increments

Model-code interpretation

The configuration fields supported by Brooks' published Full-View ordering table are decoded below. Two legacy characters are not defined by the later table and are intentionally left unresolved.

Code elementDocumented fieldInterpretation
111Base modelThreaded Full-View platform
0CConnection-orientation blockLegacy variant; the later ordering table lists 0D, 4D, 6D, and 7D but does not define 0C
JMeter sizeSize 8
4Tube designatorR-8M-25-4
6Float designator8-RV-31
CFloat material316 stainless steel
JScaleLegacy scale code not defined by the later ordering table; exact-unit imagery shows a direct-reading GPM liquid scale
DMaterials of construction316 stainless-steel fittings with PTFE packing and PTFE O-ring
AConnection typeNPT
GAccessoryHorizontal-stem valve on inlet

Legacy status and replacement

Brooks identifies the Full-View 1100 Series as legacy equipment. Replacement selection remains configuration-specific.

Legacy familyFull-View 1100 Series glass-tube variable-area flowmeters
Current retrofit familyGT1600 Series
Retrofit coverageBrooks states that GT1600 meters can be configured to retrofit Full-View models 1110, 1114, 1140, and 1144.
Selection requirementA replacement must be matched for flow range, process connections, connection orientation, wetted materials, scale basis, and valve arrangement; GT1600 is not a universal one-code substitution for 1110CJ46CJDAG.

Glass-tube safety requirements

The manufacturer applies specific glass-tube precautions to this Size 8 meter.

Documentation Downloads

Local PDF copies

Part Photos

0 images

Historical archive images for identification, labels, connectors, and condition reference, not current inventory.

Historical Listings & Prices

Historical listing data, not a current offer
Archive records1Tracked historical listing records
Historical median price$49.71Based on archived listing records
Recorded price range$49.71 - $49.71Low to high recorded listing price
Local documents2PDF copies available from Sonisys
Recorded price context

The typical recorded price range is $49.71 to $49.71. Based on 1 archived listing record; not a current offer, appraisal, or confirmed sale price.

View archived listing titles
  • BROOKS INSTRUMENT DIVISION 1110CJ46CJDAG FLOW METER GAUGE GLASS GPM LIQUID

Archived listings

Other Part Numbers & Aliases

1110CJ46CJDAGBrooks 1110CJ46CJDAGBrooks Instrument 1110CJ46CJDAG