1350EM2EAGV5A is a configured Brooks Instrument Sho-Rate 1350E glass-tube variable area flowmeter identifier. Brooks' official 1350E/1355E documentation identifies the 1350E family as Sho-Rate 50 glass-tube variable area flowmeters, with a tapered glass metering tube and float, optional needle valve or integral flow controller variants, and configuration-dependent tube, float, scale, connection, material, seal, and flow-range selections. The stored Sonisys auction history consistently describes this exact part as a Brooks Instruments 1350EM2EAGV5A Sho-Rate unit with a.007 to.0716 ACFM range
Configurations vary. Verify the exact unit before choosing a replacement.
Application classIndustrial automation and process equipment
CategoryFlow Control
Specifications
Identification
Part identifier
1350EM2EAGV5A
Device type
Glass-tube variable area flowmeter / rotameter
Series family
Brooks Sho-Rate 1350E / 1355E family
1350E family name
Sho-Rate 50
Function
Measuring principle
Variable area flow indication using a tapered glass metering tube and metering float
Service role
Local low-flow gas or liquid flow indication; configured variants may include a needle valve or an integral flow controller
Scale
1350 series scale length
65 mm nominal
Scale options
Standard R-65 mm or R-100 linear reference scale with air or water calibration table, depending on configuration
Pressure and temperature
Family pressure rating context
Brooks manual lists 170 psig over 33 degrees F to 250 degrees F (1 degree C to 121 degrees C) for CRN certification context
Connections
Process connection context
Brooks manual describes process connections as normally horizontal female NPT connections; exact connection size and material are configuration-specific
Configuration
Configured-unit boundary
Tube, float, direct-reading scale, valve or controller option, end-block material, seal material, process connection, and calibrated fluid/range must be verified from the unit label and scale markings
Observed range marking
Stored Sonisys auction titles for this exact record state.007 to.0716 ACFM
Maintenance
Inspection priorities
Inspect glass tube condition, float movement, scale markings, O-rings and seals, valve/controller assembly, connection threads, and any contamination before reuse
Applications
Application domain
Low-flow industrial gas or liquid flow measurement and purge/flow-indication service where the configured materials, seals, and calibration match the process
Documents
Hosted official documentation
Brooks Sho-Rate 1350E/1355E data sheet and installation/operation manual are hosted locally for download
