Brooks Instrument Sho-Rate Flowmeter with 8800 Flow Controller
About this part
1350EN2PAHV1A is a configured Brooks Sho-Rate glass tube variable area flowmeter identifier found in Sonisys auction history as an assembly with Brooks 8800D2L1A1CA flow controller hardware. Official Brooks Sho-Rate 1350/1355 documentation supports the glass-tube variable-area flowmeter family context, and official Brooks FC8744/FC8800/FC8900 documentation supports the flow-controller assembly context. The exact legacy 1350E configuration should be verified from the unit label, scale, and controller body marking
Configurations vary. Verify the exact unit before choosing a replacement.
Application classIndustrial automation and process equipment
CategoryFlow Control
Specifications
Identification
Device type
Glass tube variable area flowmeter with associated manual flow controller
Series family
Brooks Sho-Rate 1350/1355 glass tube variable area flowmeter family
Observed flow controller
8800D2L1A1CA appears in every stored title for this Sonisys record
Flow
Measuring principle
Variable area rotameter with glass metering tube and float
Family application
Low-flow gas and liquid applications, especially purge applications
Performance
1350G family accuracy
+/-5% at reference conditions
1355G family accuracy
+/-3% at reference conditions
Repeatability
0.25% full scale
Pressure / temperature
Sho-Rate 1350/1355 rating
200 psig from 33 F to 250 F / 13.8 bar from 1 C to 121 C
Materials
Flowmeter materials
Borosilicate glass, brass, aluminum, 316 stainless steel, clear polycarbonate, milk white polycarbonate, and Teflon options are listed in the family data sheet
End block options
Stainless steel and brass
Float material options
Glass, sapphire, stainless steel, Carboloy, and tantalum
Connections
Flowmeter connection options
Family options include 1/8 inch NPT, 1/4 inch NPT, compression fittings, 6 mm compression, RC threads, 1/4 inch VCR, and 1/4 inch ID hose depending on configured code
Flow controller
FC 8800 role
Brooks Series FC 8800 controllers are used for adjusting and maintaining liquid and gas flows with variable upstream pressures
FC controller pressure range
FC8744/FC8800/FC8900 documentation lists pressure ratings up to 1000 psig / 69 bar depending on model and configuration
FC flow range context
Official FC documentation lists flow ranges up to 480 GPH water and 2130 SCFH air depending on model and sizing
FC materials
Controller bodies may be 316 stainless steel, brass, or aluminum depending on controller model; diaphragm and O-ring materials are configuration-specific
Configuration
Configured-unit rule
Tube, float, valve/controller, scale, connection, seal, and material options vary by configured code
Model-code caution
The current Brooks 1350G/1355G model-code table should not be used to fully decode this older 1350E-style code without label confirmation
