1358F1B2FC2A1A is a configured Brooks Instrument Sho-Rate 1358 glass tube variable-area flowmeter identifier observed in Sonisys auction records and external surplus listing context. Official Brooks 1358 documentation verifies the model family as a glass tube rotameter with 10:1 rangeability, borosilicate glass metering tube construction, interchangeable tubes and floats, 316 stainless steel float, and configuration-dependent scales, valves, seals, fittings, and materials. no verified official Brooks PDF or product page is currently available that names the full configured identifier 1358F1B2FC2A1A, so exact flow range, service fluid, scale, valve arrangement, seal material, end-fitting material, and connection should be verified from the physical unit label and scale markings
Unit-specific configuration
Observed configuration
Historical listing records identify this part as 1.5-15 scfm air. Exact gas, range, fittings, valve configuration, and communication interface must be verified from the physical unit label.
Configurations vary. Verify the exact unit before choosing a replacement.
Application classIndustrial automation and process equipment
CategoryFlow Control
Specifications
Identification
Configured part identifier
1358F1B2FC2A1A
Device type
Glass tube variable-area flowmeter / rotameter
Series family
Brooks Sho-Rate Model 1358
Flow
Measuring principle
Variable-area flow indication using a tapered borosilicate glass metering tube and float
Model 1358 capacity context
Brooks documentation describes Model 1358 as suitable for water capacities from 0.8 to 5.0 gpm and includes air capacity table values up to 15 scfm, depending on selected tube, float, scale, and configuration
Performance
Model 1358 rangeability
Brooks documentation lists 10:1 rangeability for the Sho-Rate 1358 model family
Model 1358 accuracy context
Brooks documentation lists standard accuracy as +/-10% of full scale and repeatability as 0.5% of full scale for Model 1358
Pressure and temperature
Model 1358 rating context
Brooks documentation lists 200 psig at 33 degrees F to 250 degrees F, with 100 psig at 33 degrees F to 250 degrees F for CRN certification; configured use must remain within the applicable rating
Construction
Model 1358 material context
Brooks documentation lists a borosilicate glass metering tube, 316 stainless steel float, stainless steel float stops, UV-stabilized polycarbonate protective sleeve/window components, black anodized aluminum side plates, and brass or 316 stainless steel end fittings depending on configuration
Scale
Model 1358 scale context
Brooks documentation describes a nominal 75 mm scale, with standard direct-reading gpm water or scfm air markings and optional special direct-reading or metal scale plate configurations
Connections
Model 1358 connection context
Brooks documentation lists horizontal female 3/8 inch NPT threaded adapters as the standard Model 1358 connection context; exact connection on 1358F1B2FC2A1A should be verified from the unit
Options
Model 1358 option context
Brooks documentation describes optional integral or externally piped needle valves, flow-controller compatibility, panel mounting, and rotatable piping connections; these options vary by configured code
Configuration
Configured-unit rule
Tube, float, scale, service fluid, valve arrangement, connection, seal material, end-fitting material, and mounting options vary by configured code and should not be treated as universal from the model family alone
Observed configuration
Stored and external listing context
Stored auction and external surplus listings for this exact identifier report 1.5-15 scfm air / 3/8 inch NPT and 34-340 LPH water / 3/8 inch NPT contexts; these are observed configuration clues, not official model-wide specifications
