Flow Control
5860IA13YB2EA
Brooks Instrument 5860i Thermal Mass Flow Meter
About this part
5860IA13YB2EA is a configured Brooks Instrument model 5860i thermal mass flow meter for gases. The 5860i measures gas mass flow and supplies an analog flow signal; it is a measurement-only model, not the companion controller. The complete suffix represents configuration choices, so calibrated gas, full-scale range, fittings and current- or voltage-output selection must be verified from the unit label and calibration record
Configurations vary. Verify the exact unit before choosing a replacement.
Key Facts
Specifications
| Base model | Brooks 5860i thermal mass flow meter |
| Standard full-scale range | Any full-scale flow from 3 sccm to 30 slpm nitrogen equivalent |
| Accuracy | +/-1% of full scale at calibration conditions; +/-1.5% of full scale above 20 slpm |
| Repeatability | 0.25% of rate |
| Usable range | 50:1 |
| Response time | Less than 6 seconds to within 2% of final value for a 0-100% flow step |
| Maximum working pressure | 4500 psi / 31.03 MPa maximum for documented 5860i configurations |
| Operating temperature | 5 to 65 C |
| Power requirement | +15 to +28 Vdc at 90 mA |
| Output | 0-5 Vdc; jumper-selectable 4-20 mA or 0-20 mA current output |
| Connector | 15-pin DA-15P D-sub |
| External leak integrity | 1 x 10^-9 atm scc/sec helium |
Configuration boundary
The public 5860i manual defines the base model but does not decode every character of this suffix.
Documentation Downloads
Local PDF copiesPart Photos
4 imagesHistorical archive images for identification, labels, connectors, and condition reference, not current inventory.
Historical Listings & Prices
Historical listing data, not a current offerThe typical recorded price range is $1,228.00 to $1,228.00. Based on 1 archived listing record; not a current offer, appraisal, or confirmed sale price.
View archived listing titles
- BROOKS INSTRUMENT 5860IA13YB2EA 15-28VDC NSMP